Avoid Breakages
Heavy particle removal lowers screen breakage and hammer wear-out.
The IDAH grinder is equipped with a Gravity Separator Feeder, which can be used for pre-cleaning raw material. Heavy particles and ferrous items can be removed by the use of gravity separation technology and a permanent magnet.
This feeder can be applied with all types of hammermills and will eliminate heavy particles by the airflow with a steady feeding rate in animal feed, pet food, and aqua feed (floating and sinking).
Key Features
Model | PG-05 | PG-10 |
---|---|---|
Feeder Motor (HP) | 2 | 3 |
Operation capacity* (t/h) | 4-5 | 8-10 |
Note:
* Raw material for feed, powder, and grains, moisture content <12%, oil content<6%
Model | XRF-800 | XRF-1000 | XRF-1400 |
---|---|---|---|
Feeder Motor (HP) | 2 | 3 | 3 |
Operation capacity* (t/h) | 4-5 | 5-7 | 8-10 |
Note:
* Raw material for feed, powder, and grains, moisture content <12%, oil content<6%
Heavy particle removal lowers screen breakage and hammer wear-out.
Adjust the air flaps to control the gravity separation.
Permanent magnet separator to remove screw, nails, iron bits, and other magnetic material.
Large inlet opening over hammer mill length for higher efficiency.
Features
Pre-clean your raw materials to avoid getting magnetic material in your processing operations.
Features
The Gravity Separation Feeder can be applied with all type of hammermills in animal feed, pet food, and aqua feed processing operations.